Once rebooted you can check sda shows up with command:.Edit boot file to recognize sata then reboot.Sudo dd if=/home/pi/Downloads/rkspi_loader_sata.img of=/dev/mtdblock0 status=progress & sudo sync img file to your sd card with balenaetcher, I chose to use the more up to date imags from their github here make sure to unzipģ Download sata spi bootloader from orange github, place it on your sd card (mine is in downloads directory) and write to spi Relatively same instructions with different file names Remove SDcard, turn on orange pi and it should boot orange pi OS from your M.2 sata ssd now.Mount your ssd so you can edit the ssd’s boot file to support sata and reboot.Sudo dd bs=1M if=/path/your/orangepi.img of=/dev/sda status=progress & sudo sync img to your sata ssd with this command (substitute with your directory to. I just used the web browser in orange pi os to redownload from the website which for me put it in directory /home/orangepi/Downloadsįlash your downloaded. Put the same Orange Pi OS image you used in step 1 in any directory on your orange pi making sure it is unzipped and is in. On reboot you will still boot into SD card but now you should see SDA (your sata SSD) show up when typing lsblk.Edit boot file on sd card to recognize sata by adding overlays line to the bottom, save then reboot.Sudo dd if=/usr/share/orangepi5/rkspi_loader_sata.img of=/dev/mtdblock0 & sudo sync Sudo dd if=/dev/zero of=/dev/mtdblock0 bs=1M count=1 then make sure to wipe your SPI of any previous bootloader (give it time to complete, you'll know it's done when you get your cursor back in terminal).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |